Development of Injection Bottle Shaker Version 3

Authors

  • jintana amnartkitikorn -
  • Pongsawat mnartkitikorn

Keywords:

development, shaker, injection drug

Abstract

The purposes of this research were: 1) to study and analyze the problems that arise from use of the injection shaker prototype and the Injection Bottle Shaker version 2; 2) to design and construct the Injection Bottle Shaker version 3, which can reduce the problems and defects of the injection shaker prototype and the Injection Bottle Shaker version 2; and 3) to evaluate the efficiency of the Injection Bottle Shaker  version 3. The results of the efficiency test showed that the Injection Bottle Shaker version 3 had average shaking rates of 268 and 305 times per minute. The results of shaking the injection bottle 25 times showed that the device was able to shake the injection bottle to dissolve the powder in a minimum time of 1 minute (4%), 2 minutes (50%), 3 minutes (36%), and in a maximum time of 4 minutes (12%). It had an operating noise level of 60.17 and 61.68 dBA, which meant the overall performance was higher compared to the injection shaker prototype and the Injection Bottle Shaker version 2.

References

Amnartkitikorn, J. and Amnartkitikorn, P. (2013). Development of Injection Bottle Shaker version.2. (Research report). Lampang Rajabhat University.

Amnartkitikorn, J., Yumon, P. and Chaireung, K. (2012). Development of Injection Bottle Shaker for hospitals in Lampang. Journal of Industry Technology Lampang Rajabhat University, 5(2), 11-27.

Angular Motion - Power and Torque. (n.d.). Angular Motion - Power and Torque. [online], Available: https://www.engineeringtoolbox.com/angular-velocity-acceleration-power-torque-d_1397.html.

Birgitta, Thomas, and Dietrich H. (n.d.) GUIDELINES FOR COMMUNITY NOISE. [online], Available: https://www.who.int/docstore/peh/noise/Comnoise-1.pdf

Engineerknowledge. (2020, February 20). Type of motor control. [online], Available: http://engineerknowledge.blogspot.com/2011/02/blog-post_20.html.

fromfactory. (2022). Infrared IR Thermometer. [online], Available: https://www.fromfactory.net/ product/364/เทอร์โมมิเตอร์อินฟาเรด-มิเตอร์วัดอุณหภูมิอินฟาเรด-uni-t-ut-300a-non-contact-infrared-ir-thermometer.

Indyplasticsheet. (2022). ซุปเปอร์ลีน พลาสติกสารพัดประโยชน์. [online], Available: https://www.indyplasticsheet.com/th/articles/25092-ซุปเปอร์ลีน-พลาสติกสารพัดประโยชน์.

instrumart. (2022). Sound Level Meter. [online], Available: http://testinstruments.pk/dt-2236b-lcd-optical-contact-tachometer.

MORO l Manufacture Overhaul Rapid and Optimal. (2020) Gear drive system. [online], Available: http://www.moro.co.th/ gear drive system./

OMRON. (2020). Solid-state Timer H3CR. [online], Available: https://www.omron-ap.co.th/data_pdf/cat/h3cr_l084-e1_3_1_csm1013792.pdf?id=193.

Pornsiri, N., and Nathapindhu, G. (2018). Noise Level of Inpatient Department Sunpasitthiprasong Hospital Ubon Ratchathani. Research Journal Khon Kaen University (Graduate edition), 18(1), 62–71.

Superlenethailand. (2022). Superlene. [online], Available: http://www.superlenethailand.com/16646203/nylon-ซุปเปอร์ลีน-ไนล่อน.

Testinstruments. (2022). LCD Optical Contact Tachometer. [online], Available: https://www.instrumart.com/products/25212/extech-407740-sound-level-meter.

Thaimechanic.com. (2018, August 22). Finding the ratio of straight gears. [online], Available: https://www.thaimechanic.com/article-208-read.html.

Tubtimpadit. J. (2011). Interviewer by J. Amnatkitikorn, [Tape recording]. Lampang Rajabhat University. Lampang.

Ultimatecommercial. (2020). Electric Motor Insulation Class. [online], Available: http://www.ultimatecommercial.co.th/ Insulation Class./

Published

2022-12-30

Issue

Section

บทความวิจัย