Study on Trajectory Motion of Intra Row Weeder
Article Sidebar
Main Article Content
Abstract
Weeding is a critical and labor-intensive process. A mechanical hydraulic actuated weeder was developed by adopting a rotary mechanism that consisted of a rotating blade with the diameter and width of the weeding blade. Instead of lab and field evaluation, the weeding tool's path was traced using the SolidWorks software to reduce cost and time and improve performance and accuracy. A 3D model of the intra-row weeder complex with relative handling modules was analyzed for motion using the SolidWorks Motion system. The blade center moved parallel to the crop row, with the swept area passing between the plant's forming a acycloidal path in rows. Controlled laboratory experiments were conducted to analyze the effects of the weeding blade geometry, forward speed (1, 1.2 and 1.4 km/h), and weeding tool speed (30, 40, 50 and 60 rpm). The results showed that plant damage was much less at a speed of 1.2 km/h and a weeding tool speed of 50 rpm was found to be optimum for effective weeding operation with plant-to-plant spacing of 45 cm in the experimental test rig.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright Transfer Statement
The copyright of this article is transferred to Current Applied Science and Technology journal with effect if and when the article is accepted for publication. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, electronic form (offline, online) or any other reproductions of similar nature.
The author warrants that this contribution is original and that he/she has full power to make this grant. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors.
Here is the link for download: Copyright transfer form.pdf
References
Xie, C.Q., Yang, C., Hummel Jr, A., Johnson, G.A. and Izuno, F.T., 2018. Spectral reflectance response to nitrogen fertilization in field grown corn. International Journal of Agricultural and Biological Engineering, 11(4), 118-126.
Chandel, A.K., Tewari, V.K., Kumar, S.P., Nare, B. and Agarwal, A., 2018. On-the-go position sensing and controller predicated contact-type weed eradicator. Current Sciences, 114(7), 1485-1494.
Yadav K.R., Surendrakumar, A., Dhananchezhiyan, P., Sivakumar, S.D. and Duraisamy, M.R., 2023. Investigation of physiological parameters of weeds for the development of inter and intra row weeder. European Chemical Bulletin, 12(10), 2926-2944.
Ahmad, M.T., 2012. Development of an Automated Mechanical Intra-row Weeder for Vegetable Crops. M.Sc. Iowa State University, USA.
Carballido, J., Rodríguez-Lizana, A., Vega, J.A. and Pérez-Ruiz, M., 2013. Field sprayer for inter and intra-row weed control: performance and labor savings. Spanish Journal of Agricultural Research, 11(3), 642-651.
Peruzzi, A., Martelloni, L., Frasconi, C., Fontanelli, M., Firchio, M. and Raffaelli, M., 2017. Machines for non-chemical intra-row weed control in narrow and wide-row crops: a review. Journal of Agricultural Engineering, 48(2), https://doi.org/10.4081/jae.2017.583.
Chandel, N.S., Chandel, A.K., Roul, A.K., Solanke, K.R. and Mehta, C.R., 2021. An integrated inter-and intra-row weeding system for row crops. Crop Protection, 145, https://doi.org/10.1016/jcropro.2021.105642.
Kumar, S.P., Tewari, V.K., Chandel, A.K., Mehta, C.R., Nare, B., Chethan, C.R., Mundhada, K., Shrivastava, P., Gupta, C. and Hota, S., 2020. A fuzzy logic algorithm-derived mechatronic concept prototype for crop damage avoidance during eco-friendly eradication of intra-row weeds. Artificial Intelligence in Agriculture, 4, 116-126.
Jakasania, R.G., Yadav, R. and Rudani, M.R., 2019. Performance evaluation of intra row weeder in soil bin. International Journal of Current Microbiology and Applied Sciences, 8(6), 2781-2785.
Dedousis, A.P., Godwin, R.J., O’Dogherty, M.J., Tillett, N.D. and Grundy, A.C., 2007. Inter and intra-row mechanical weed control with rotating discs. In: J.V. Stafford, ed. Precision Agriculture '07. Wageningen: Wageningen Academic Publishers, pp. 491-498.
Raju, Y.K, Surendrakumar, A., Dhananchezhiyan. P, Sivakumar, S.D. and Duraisamy, M.R., 2023. Automated Check Row Weeder. India. Patent No. 384947-001.
Cordill, C. and Grift, T.E., 2011. Design and testing of an intra-row mechanical weeding machine for corn. Biosystems Engineering, 110(3), 247-252.
Srivastave, A.K., Goering, C.E., Rohrbach, R.P. and Buckmaster, D.R., 2006. Engineering Principles of Agricultural Machines. 2nd ed. St. Joseph, MI: American Society of Agricultural and Biological Engineers.
American Society of Agricultural Engineers, 1990. ASAE Standards. 37th ed. ST Joseph MI: American Society of Agricultural Engineers.
Balas, P.R., Makavana, J.M., Mohnot, P., Jhala, K.B. and Yadav, R., 2022. Inter and intra row weeders: A review. Current Journal of Applied Science and Technology, 41(28), 1-9.
Blasco, J., Aleixos, N., Roger, J.M., Rabatel, G. and Moltó, E., 2002. AE-Automation and emerging technologies: Robotic weed control using machine vision. Biosystems Engineering, 83(2), 149-157.
Busari, L.D., 1996. Influence of Row-spacing on weed control in Soya bean in the Southern Guinea Savanna of Nigeria. Nigerian Journal of Weed Science, 19, 17-23.
Gobor, Z. and Lambers, P.S., 2007. Prototype of a rotary hoe for inter-row weeding. 12th IFT0MM World Congress, Besancon, France, June, 18-21, 2007, pp. 99-101.
Han, B., Guo, C., Gao, Y.L., Liu, Q., Sun, S. and Dong, X.W., 2020. Design and experiment of soybean intra-row weeding monomer mechanism and key components. Transactions of the Communications for Statistical Applications and Methods, 51(6), 112-121. (in Chinese)
Hendrick, J.G. and Gill, W.R., 1978. Rotary tiller design parameters, V: Kinematics. Transaction of American Society of Agricultural Engineers, 21(4), 658-660.
Hoki, M., Horrio, H. and Singh, G., 1992. The Literature of Agricultural Engineering. Cornell: Cornell University Press.
Kepner, R.A., Bainer,R. and Barger, E.L. 1978. Principles of Farm Machinery. 3rd ed. Westport: AVI Publication Co.
Lavabre, E.M., 1991. Weed Control. London: Macmillan Education Ltd.
Nganilwa, Z.M., Makungu, P.J. and Mpanduji, S.M., 2003. Development and Assessment of an Engine Powered hand-held weeder in Tanzania. International Conference on Industrial Design Engineering, UDSM, Dare salam, July 17-18, 2003, pp. 146-151.
Niu, C.L. and Wang, J.W., 2017. Paddy strains between weeding member working mechanism and weeding track test. Journal of Agricultural Mechanization Research, 39(1), 177-181. (in Chinese)
Nwuba, E.I.U., 1982. The effect of the working posture of productivity of the Nigerian hoe farmer. Nigerian Society of Agricultural Engineers, 6(1), 37-47.
Odigboh, E.U. and Ahmed, S.F., 1980. Development of a ridge profile weeder. Nigerian Journal of Technology, 4(1), 1-7.
Odigboh, E.U., 2002. Mechanization of the Nigerian Agricultural Industry: Pertinent notes, Pressing Issues, Pragmatic Options. Lagos: Nigerian Academy of Science.
Olaoye, J.O., 2007. An evaluation of farm power and equipment ownership and management in Niger State, Nigeria. Nigeria Journal of Technological Development, 5(1), 94-102.