Design and Development of a Batter Mixing Machine for Khanom La to Preserve Local Wisdom and Enhance Community Sustainability
Main Article Content
บทคัดย่อ
This research aimed to design and develop a batter mixing machine for Khanom La production in order to reduce the time required for batter preparation, while preserving local wisdom and supporting sustainable community development. The designed machine consists of four main components: the machine frame, the power transmission system, the stirring unit, and the automatic timer control system. The paddle stirrer was selected because it is suitable for low-speed mixing. Open spaces were incorporated into the stirrer design to reduce batter viscosity during the mixing process. The study then compared the mixing time and mixing capacity of manual labor with those of the developed batter mixing machine based on three repeated trials. Manual mixing required an average of 40.00 minutes to mix 10 kilograms of batter, resulting in an average mixing capacity of 15.15 kilograms per hour. In contrast, the developed machine took an average of 13.33 minutes, with an average mixing capacity of 46.06 kilograms per hour. The difference in mixing capacity between manual labor and the machine was analyzed using a Independent Samples t-test at a significance level of 0.05. The results showed a p-value of 0.014, which was lower than the significance level of 0.05, indicating a significant difference between the two methods. The findings demonstrate that the batter mixing machine operated 3.04 times faster than manual labor at the 0.05 significance level, which reduced the production time of Khanom La for the community.
Downloads
Article Details

อนุญาตภายใต้เงื่อนไข Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
เจ้าของลิขสิทธิ์ (สถาบันวิจัยและพัฒนา มหาวิทยาลัยกาฬสินธุ์) ผู้เขียน ตกลงว่าการทำสำเนาบทความหรือส่วนใดส่วนหนึ่งของบทความดังกล่าวในรูปแบบสิ่งพิมพ์หรืออิเล็กทรอนิกส์ตามที่ได้รับอนุญาต จะต้องระบุประกาศลิขสิทธิ์ตามที่กำหนดไว้ในวารสาร พร้อมทั้งอ้างอิงข้อมูลฉบับสมบูรณ์ของบทความที่ตีพิมพ์ในวารสารที่จัดทำโดย สถาบันวิจัยและพัฒนา มหาวิทยาลัยกาฬสินธุ์ อย่างครบถ้วนทุกครั้ง
เอกสารอ้างอิง
Nakhon Si Thammarat Journal, Special Issue: “Duan Sip 51” Commemorating the Traditional Tenth Lunar Month Festival of Nakhon Si Thammarat Province. (2008). Nakhon Si Thammarat Provincial Administrative Organization; K.U. Quality Printing Co., Ltd., Songkhla.
https://finearts.go.th/storage/contents/2023/05/file/dX4mBJJZtx0xJ9sL5y8FXXEZ0vrnrFYHO8boJlZg.pdf
Nutwarat K, Pranee T, Phinyapat S, Boonchub B. Case study and design the stirrer machine from solar energy for sugar jaggery. Art and Architecture Journal Naresuan University. 2021: 12(1): 121-132. https://so01.tci-thaijo.org/index.php/ajnu/article/view/242126
Ronnarit J, Athika C. The Development of a curry puff filling mixing machine using heat from liquefied petroleum gas (LPG) for community use. Udon Thani Rajabhat University Journal of Sciences and Technology. 2020: 8(1), 75-87. https://ph01.tci-thaijo.org/index.php/scudru/article/view/239973
Pakin M, Weeraphat I, Sutthirat K, Thep K. The developments of fruit processing stirrer suitable machine for the elderly in Ban Pa Xuan fruit conserve community enterprise Group, Wang Hin, Mueang Tak District, Tak Province. Proceedings of the National Academic Conference for Students, Kamphaeng Phet Rajabhat University, No. 1, 2021: 1053-1060. https://research.kpru.ac.th/research2/pages/filere/11022021-03-06.pdf
Amnad T, Pongtorn W. Design and test of horizontal rice mixer with ribbon stirring blade. Academic Journal Uttaradit Rajabhat University. 2022: 17(2): 37-54. https://ph01.tci-thaijo.org/index.php/uruj/article/view/248161
Ojo O, Oyerinde A, Bamisaye O, Adewole J, Adepoju T. Development of dough kneading machine for small and medium-sized enterprises. Journal of Applied Research in Technology & Engineering. 2024; 5(1): 23-31. https://doi.org/10.4995/jarte.2024.20210
Oni K, Akinmolayan O, Ige A M. Performance evaluation of dough mixing machine. ABUAD Journal of Engineering Research and Development (AJERD). 2025: 8(2): 130-139. https://journals.abuad.edu.ng/ajerd/article/view/926
Fatah I Y A, Ramli N A, Rohimi R. Conceptual design and simulation analysis of dough mixer-maker machine. Malaysian Journal of Applied Sciences. 2022; 7(2): 93-102. https://doi.org/10.37231/myjas.2022.7.2.340
Sittiboon S, Thunyatip S. Mixing machine for beauty product and liquid detergents. Journal of Innovation Technology Research. 2021: 5(2), 19-29. https://so04.tci-thaijo.org/index.php/JIT/article/view/253866
Pakornkiat P, Nikom L, Asada W, Thiangtham S. Development of prototype semi-automatic chitosan stirrer for community. Journal of Social Science and Cultural. 2024: 8(7): 115-126. https://so06.tci-thaijo.org/index.php/JSC/article/view/275239/184347
Supakanya K, Bhagavadi S. Design and Efficiency Assessment of Horizontal Fertilizer Mixing Machine. UTK Research Journal. 2025: 19(1): 100-105. https://ph02.tci-thaijo.org/index.php/rmutk/article/view/259072
Pratama A T, Zuardi G. Performance enhancement of mixing impellers based on mixture ppm analysis. Journal of Applied Agricultural Science and Technology. 2025: 9(1): 70-84. https://doi.org/10.55043/jaast.v9i1.266