ASIC Chip Design and Implementation of LCD Driver Circuit for Thai Character Display

Authors

  • Koarakot Wattanavichean Department of Electrical Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand.
  • Witit Limpiyapirom Department of Electrical Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, Thailand.

Keywords:

ASIC chip design, LCD driver circuit, Thai character display

Abstract

This research is to design a liquid crytal display (LCD) driver circuit for displaying 20*8 dot-matrix Thai and English characters as well as the Arabic numerals. The design is composed of 2 main parts, namely, character generator and driver-controller circuit. The data of all characters have been stored in a 8 kbytes EPROM. Designed circuit has been tested by connecting with standard CMOS ICs and implementing with FPGA chip (XC3020). In the stage of FPGA implementation. OrCAD SDT & VST 386+ running on PC have been used as schematic design entry and simulation tools, respectively. Both electrical and physical testings have been done. The electrical testing results show a good agreement with our design and also LCD illustrates a well Thai character display.

Downloads

Published

1996-12-31

How to Cite

Koarakot Wattanavichean, and Witit Limpiyapirom. 1996. “ASIC Chip Design and Implementation of LCD Driver Circuit for Thai Character Display”. Agriculture and Natural Resources 30 (4). Bangkok, Thailand:506-18. https://li01.tci-thaijo.org/index.php/anres/article/view/241203.

Issue

Vol. 30 No. 4 (1996): October-December

Section

Research Article

License

online 2452-316X print 2468-1458/Copyright © 2022. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/),
production and hosting by Kasetsart University of Research and Development Institute on behalf of Kasetsart University.