Study on Paddy Grain from Axial Flow Rice Thresher

Authors

  • Prasarn Kradangnga National Agriculture Machinery Center, Kasetsart University, Kamphaeng Saen, Nakorn Pathom 73140, Thailand.
  • Anek Sukchareon National Agriculture Machinery Center, Kasetsart University, Kamphaeng Saen, Nakorn Pathom 73140, Thailand.
  • Niwat Suwatanakul National Agriculture Machinery Center, Kasetsart University, Kamphaeng Saen, Nakorn Pathom 73140, Thailand.
  • Kyo Kobayashi Short term and long term experts in KU-JAPAN Project
  • Yoshiaki Goto Short term and long term experts in KU-JAPAN Project

Abstract

An axial flow rice thresher with drum length of 4 feet was tested to evaluate the performance under different drum speed and feeding rate. The rice variety of Luang Pathan which had 13.6% grain moisture content, 10.2% straw moisture content, 60.6% grain ratio and 71 cm cut crop length was used. Grain output of the thresher was investigated cracked grain and checked the braken grain in milling test grain. From the result of the test, total losses due to broken, unthreshed and blown grain were about 1% when onload drum speed was nearly 600 rpm. The cracked grain ratio and the broken grain ratio in milled grain were increased with the rising up of the onload drum speed., At the onload drum speed of 600 rpm, the cracked and broken grain ratios were about 3% and 6% respectively.

Downloads

Published

1991-12-31

How to Cite

Prasarn Kradangnga, Anek Sukchareon, Niwat Suwatanakul, Kyo Kobayashi, and Yoshiaki Goto. 1991. “Study on Paddy Grain from Axial Flow Rice Thresher”. Agriculture and Natural Resources 25 (5). Bangkok, Thailand:140-48. https://li01.tci-thaijo.org/index.php/anres/article/view/242024.

Issue

Section

Research Article