Mechanical Packing of Tangerine

ผู้แต่ง

  • Bundit Jarimopas National Agricultural Machinery Center, Kasetsart University, Kamphaengsaen Campus, Nakhon Pathom 73140, Thailand
  • Kitidet Phoetiniyom National Agricultural Machinery Center, Kasetsart University, Kamphaengsaen Campus, Nakhon Pathom 73140, Thailand
  • Seksan Srihawong National Agricultural Machinery Center, Kasetsart University, Kamphaengsaen Campus, Nakhon Pathom 73140, Thailand
  • Seksan Janpeng Dept. of Agricultural Engineering, Faculty of Engineering, Kasetsart University, Karnphaengsaen Campus.

คำสำคัญ:

packing, tangerine

บทคัดย่อ

This research is to find mechanism to pack tangerine mechanically. The prototype consists of 3 parts, conveyor, feeder and packer. There are 3 conveyors two of which are identical and made of 3-inch wide conventional belt travelling horizontally. They are 50 cm. wide and 122 cm. long. The third conveyor moving vertically is 50 cm. wide and 64 cm. long. The feeder holding 100 kg. tangerine is inclined, made of steel and lined by sponge. The packer receiving tangerine from the feeder semiautomatically fills up the empty basket. Performance test results the prototype can pack 853.3 kilogram of tangerine per hour with the damage of 2.4%.

ดาวน์โหลด

เผยแพร่แล้ว

1992-03-31

รูปแบบการอ้างอิง

Bundit Jarimopas, Kitidet Phoetiniyom, Seksan Srihawong, และ Seksan Janpeng. 1992. “Mechanical Packing of Tangerine”. Agriculture and Natural Resources 26 (1). Bangkok, Thailand:60-66. https://li01.tci-thaijo.org/index.php/anres/article/view/241755.

ฉบับ

ปีที่ 26 ฉบับที่ 1 (1992): January-March

ประเภทบทความ

Research Article

สัญญาอนุญาต

online 2452-316X print 2468-1458/Copyright © 2022. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/),
production and hosting by Kasetsart University of Research and Development Institute on behalf of Kasetsart University.