Development of Spherical Fruit Packing Machine

ผู้แต่ง

  • Bundit Jarimopas National Agricultural Machinery Center, Kasetsart University, Kamphaeng Saen Campus, Nakhon Pathom 73140, Thailand.
  • Kittidet Phoetiniyom National Agricultural Machinery Center, Kasetsart University, Kamphaeng Saen Campus, Nakhon Pathom 73140, Thailand.

คำสำคัญ:

packing machine

บทคัดย่อ

This research is to develop a machine to pack spherical fruits. The prototype consists of 3 parts, conveyor, feeder and packer. There are 3 conveyors two of which are identical, 50 cm. wide and 122 cm. long, and made of 3-inch wide conventional belt traveling horizontally. The vertical conveyor is 50 cm. wide and 64 cm. long. The feeder holding 100 Kg. spherical fruits is inclined, made of steel and lined by spong. The packer receiving fruits from the feeder semiautomatically fills up the empty basket. Performance test results the prototype can automatically pack tangerine and mangosteen fruits at the rate of 1.84 and 1.34 ton per hour. No mechanical damage of fruits were found.

เผยแพร่แล้ว

1992-12-31

รูปแบบการอ้างอิง

Bundit Jarimopas, และ Kittidet Phoetiniyom. 1992. “Development of Spherical Fruit Packing Machine”. Agriculture and Natural Resources 26 (5). Bangkok, Thailand:75-78. https://li01.tci-thaijo.org/index.php/anres/article/view/241875.

ฉบับ

ปีที่ 26 ฉบับที่ 5 (1992): January-December

ประเภทบทความ

Research Article

สัญญาอนุญาต

online 2452-316X print 2468-1458/Copyright © 2022. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/),
production and hosting by Kasetsart University of Research and Development Institute on behalf of Kasetsart University.