The Effect of Process Factors on the Mechanical Properties of Styrene-NR Elastomers Containing Natural Rubber-Graft- Polystyrene

ผู้แต่ง

  • Tarinee Nampitch Department of Physico-Chemical Processing Technology, Faculty of Agro-Industry, Kasetsart University, Bangkok 10900, Thailand.
  • Polchit Buakaew Rubber Research Institute, Department of Agriculture, Ministry of Agriculture and Co-operative, Thailand.

คำสำคัญ:

natural rubber modification, styrene, emulsion, graft copolymerization, synthesis

บทคัดย่อ

Styrene-NR elastomers containing natural rubber-graft-polystyrene were prepared by an emulsion polymerization using potassium persulfate as an initiator. The effect of process factors on tensile strength was investigated by varying the temperature, rubber-to-monomer ratio, and initiator and
emulsifier contents from 50 to 64 oC, 1.5 to 9, 0.8 to 1.4 g, and 4.5 to 6.5 g, respectively. Experimental results indicated that the tensile strength increased with an increase in reaction temperature, rubber to monomer ratio, and initiator and emulsifier contents.

ดาวน์โหลด

เผยแพร่แล้ว

2006-12-30

รูปแบบการอ้างอิง

Tarinee Nampitch, และ Polchit Buakaew. 2006. “The Effect of Process Factors on the Mechanical Properties of Styrene-NR Elastomers Containing Natural Rubber-Graft- Polystyrene”. Agriculture and Natural Resources 40 (6 (Suppl.). Bangkok, Thailand:1-6. https://li01.tci-thaijo.org/index.php/anres/article/view/244008.

ฉบับ

ปีที่ 40 ฉบับที่ 6 (Suppl.) (2006): November-December

ประเภทบทความ

Research Article

สัญญาอนุญาต

online 2452-316X print 2468-1458/Copyright © 2022. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/),
production and hosting by Kasetsart University of Research and Development Institute on behalf of Kasetsart University.