Characteristics of Heated Mixed Soy Protein Isolate and Sodium Caseinate
คำสำคัญ:
aggregates, caseinate, gelation, salt-induced, soy protein isolateบทคัดย่อ
This study investigated the influences of protein concentration (10-15% w/v), protein ratio, pH (3.0-5.4), salt types and concentrations (Na lactate 0-250 mM or Ca lactate 0-60 mM) on the characteristics of heated mixed soy protein isolate (SPI) and sodium caseinate (SCN). Heat treatment at
80°C for 30 min did not alter the MW profiles of the SCN or SPI-SCN mixture. However, further addition of Na lactate and Ca lactate to the heated protein suspensions resulted in a high degree of aggregation observed as turbidity results, particularly in the suspensions containing a high ratio of SCN at pH 3.0 (p<0.05). Salt-mediated sulfhydryl-disulfide interchange was involved in the aggregation of heated mixed protein even with an acidic pH. The second stage heat treatment (at 80°C for 30 min) of the salt-induced aggregates, at a protein concentration below the minimum concentration required to form gel (10% w/v), resulted in the formation of a stable suspension, sedimentation, a viscous suspension or gelation depending on the protein ratio, pH and salt concentration. Such two-stage heating process applied to the SPI-SCN mixture could be used to achieve both functional properties and nutritional qualities, which are desirable characteristics of high protein diets.
ดาวน์โหลด
เผยแพร่แล้ว
รูปแบบการอ้างอิง
ฉบับ
ประเภทบทความ
สัญญาอนุญาต
online 2452-316X print 2468-1458/Copyright © 2022. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/),
production and hosting by Kasetsart University of Research and Development Institute on behalf of Kasetsart University.

