High Sensitivity of HSA Capacitive Immunosensor using Poly-para-phenylenediamine Modified Gold Electrode

Main Article Content

Orawan Thipmanee

Abstract

The highly sensitive capacitive immunosensor detects the capacitance change at the electrode-electrolyte interface when the immobilized antibody on the electrode surface binds to the antigen in the sample. One of the important steps for the construction of the capacitive sensor is the immobilization of antibody via an insulating layer on the electrode surface. This layer is generally based on a self-assembled monolayer (SAM) of alkanethiol compounds, however, the self-assembling process requires a relatively long period of time. In this work electropolymerization of para-phenylenediamine (p-PD) on the gold electrode surface was investigated as an alternative for the immobilization of antibodies. Anti-human serum albumin (anti-HSA) was immobilized for the capacitive detection of HSA with the flow system. Both concentration of the monomer solution and the number of electropolymerization scan were optimized. Under the optimized conditions, a wide linear concentration range, 1.0x10 -15 to 1.0x10 -10 M, was obtained with a very low detection limit of 1.0x10 -15 M. This sensor could be reused up to 31 times with relative standard deviation (RSD) lower than 3.0%. Moreover, an easy and very fast of the poly-para-phenylenediamine (PpPD) modified a gold electrode was obtained.

Article Details

How to Cite
Thipmanee, O. (2018). High Sensitivity of HSA Capacitive Immunosensor using Poly-para-phenylenediamine Modified Gold Electrode. YRU Journal of Science and Technology, 3(1), 67–78. retrieved from https://li01.tci-thaijo.org/index.php/yru_jst/article/view/130538
Section
Research Article

References

1. Altintas, Z., Uludag, Y., Gurbuz, Y. & Tothill, I. (2012). Development of Surface Chemistry for SPR based Sensors for the Detection of Protein and DNA molecules. Analytica Chimica Acta, 712, 138-144.

2. Berggren, C., Bjarnason, B. & Johansson, G. (2001). Capacitive Biosensors. Electroanalysis, 13, 173-180.

3. Cieplak, M., Szwabinska, K., Sosnowska, M., Bikram, C., Borowicz, P., Noworyta, K., et al. (2015). Selective electrochemical sensing of human serum albumin by semi-covalent molecular imprinting. Biosensors and Bioelectronics, 74, 960-966.

4. Cosnier, S. (2003). Biosensors based on electropolymerized film: new trends. Analytical and Bioanalytical Chemistry, 377, 507-520.

5. Ferretti, S., Paynter, S., Russell, D. A., Sapsford, K. E. & Richardson, D. J. (2000). Self-assembled monolayers: a versatile tool for the formulation of bio-surfaces. Trends in Analytical Chemistry, 19, 530-540.

6. Krystal, G., Macdonald, C., Munt, B. & Ashwell, S. (1985). A Methods of Quantitating Nanogram Amounts of Soluble Protein Using the Principle of Silver Binding. Analytical Chemistry, 148, 451-460.

7. Lu, L., He, H-Z., Zhong, H-J., Liu, L-J., Chan, D. S-H., Leung, C-H., et al. (2014). Luminescent detection of human serum albumin in aqueous solution using a cyclometallated iridium (III) complex. Sensors and Actuators B, 201, 177-184.

8. Peng, H., Zhang, L., Soeller, C. & Travas-Sejdie, J. (2009). Conducting polymers for electrochemical DNA sensing. Biomaterials, 30. 2132-2148.

9. Pournaras, A. V., Koraki, T. & Prodromidis, M. I. (2008). Development of an impedimetric immunosensor based on electropolymerized polytyramine films for the direct detection of Salmonella typhimurium in pure cultures of type strains and inoculated real samples. Analytica Chimica Acta, 624, 301-307.

10. Rezaei, B., Boroujeni, M. K. & Ensafi, A. A. (2015). Fabrication of DNA, o-phenylenediamine, and gold nanoparticle bioimprinted polymer electrochemical sensor for the determination of dopamine. Biosensors and Bioelectronics, 66, 490-496.

11. Riepl, M., Mirsky, V. M., Novotny, I., Tvarozek, V., Rehacek, V. & Wolfbeis, O. S. (1999). Optimization of capacitive affinity sensors: drift suppression and signal amplification. Analytica Chimica Acta, 302, 77-84.

12. Shervedani, R. K. & Hatefi-Mehrjardi, A. (2007). Electrochemical characterization of directly immobilized glucose oxidase on gold mercaptosuccinic anhydride self-assembled monolayer. Sensors and Actuators B, 126, 415-423.

13. Tran, T. L., Chu, T. X., Huynh, D. C., Pham, D. T., Luu, T. H. T. & Mai, A. T. (2014). Effective immobilization of DNA for development of polypyrrole nanowires based biosensor. Applied Surface Science, 314, 260-265.

14. Wu, J., Ben, Y. & Chang, H-C. (2005). Particle detection by electrical impedance pectroscopy with asymmetric-polarization AC electroosmotic trapping. Microfluid Nanofluid, 1, 161-167.

15. Yuqing, M., Jianrong, C. & Xiaohua, W. (2004). Using electropolymerized non-conducting polymers to develop enzyme amperometic biosensors. TRENDS in Biotechnology, 22, 227-231.

16. Zhang, Z., Liu, H. & Deng, J. (1996). A glucose biosensor based on immobilization of glucose oxidase in electropolymerized o-aminophenol film on platinized glassy carbon electrode. Analytical Chemistry, 68, 1632-1638.