Study and development of cassava weeding machine with fertilizer in cassava field การศึกษาและพัฒนาเครื่องกำจัดวัชพืชพร้อมใส่ปุ๋ยในไร่มันสำปะหลัง

Main Article Content

Rewat Termkla
Lakkana Pitak
Sahapat Chalachai

บทคัดย่อ

             งานวิจัยฉบับนี้มีวัตถุประสงค์เพื่อศึกษาและพัฒนาเครื่องกำจัดวัชพืชพร้อมใส่ปุ๋ยในไร่มันสำปะหลัง ทดสอบประสิทธิภาพการทำงานโดยการพ่วงท้ายรถแทรกเตอร์ที่ความเร็วรอบของเครื่องยนต์ 2,000 rpm. ใช้เกียร์ Low-1, Low-2, Low-3 และ High-1 ในพื้นที่การทดสอบ 162 m2 พบว่า ความสามารถการทำงานทางไร่จริงเฉลี่ย 0.60, 0.94, 1.17 และ 2.40 rai.hr-1 และประสิทธิภาพการทำงานเท่ากับ 82.18, 82.41, 74.83 และ 83.02% ตามลำดับ จากการทดสอบเมื่อความเร็วเพิ่มขึ้นประสิทธิภาพการทำงานทางไร่มีค่าใกล้เคียงกัน โดยมีประสิทธิภาพการทำงานที่ดีที่สุดที่เกียร์ High–1 และค่าอัตราการลื่นไถลมีค่าใกล้เคียงกันแต่มีค่าต่ำกว่าค่ามาตรฐานที่ 10-14% ซึ่งบ่งบอกให้ทราบว่าสามารถที่จะลดน้ำหนักของอุปกรณ์ลงได้อีกเพื่อเป็นการประหยัดน้ำมันเชื้อเพลิง และมีประสิทธิภาพการกำจัดวัชพืชเฉลี่ยเท่ากับ 88.63, 86.52, 85.52 และ 86.41% ที่ความเสียหายของต้นมันสำปะหลังเฉลี่ยเท่ากับ 9.00, 13.04, 5.88 และ 4.44% สำหรับอัตราการสิ้นเปลืองน้ำมันเชื้อเพลิงเฉลี่ยเท่ากับ 4.36, 7.40, 11.44 และ 12.50 L.hr-1 ตามลำดับ จากผลการทดลองพบว่า ที่เกียร์ Low–1 มีประสิทธิภาพการกำจัดวัชพืชสูงที่สุด และเมื่อความเร็วเพิ่มขึ้นจะมีเปอร์เซ็นต์ความเสียหายของต้นมันสำปะหลัง รวมถึงอัตราการสิ้นเปลืองน้ำมันเชื้อเพลิงเพิ่มขึ้นด้วย


     


     


The objective of this research was to study and development of cassava weeding machine with fertilizer in the cassava field. Test the performance of the tractor-mounted at an engine speed of 2,000 rpm. Using Low-1, Low-2, Low-3 and High-1 gears in a test area of ​​162 m2. It was found that the effective field capacity average 0.60, 0.94, 1.17 and 2.40 rai.hr-1 and efficiency Field was 82.18, 82.41, 74.83 and 83.02% respectively. From the test when the speed increased the effective field capacity had similar values. It has the best performance at High–1 gear and the slip ratio values ​​are similar but 10-14% lower than the standard values, indicating that the weight of the equipment can be reduced. again, to save fuel and the average weed efficiency was 88.63, 86.52, 85.52, and 86.41%. The average cassava plant damage was 9.00, 13.04, 5.88, and 4.44%. The average fuel consumption rate was 4.36, 7.40, 11.44, and 12.50 L.hr-1 respectively. From the experimental results it was found that the Low–1 gear had the highest weed suppression efficiency. And when the speed increases, there will be a percentage of damage to the cassava plants. Including the rate of fuel consumption increased as well.

Article Details

รูปแบบการอ้างอิง
Termkla, R., Pitak, L., & Chalachai, S. (2025). Study and development of cassava weeding machine with fertilizer in cassava field: การศึกษาและพัฒนาเครื่องกำจัดวัชพืชพร้อมใส่ปุ๋ยในไร่มันสำปะหลัง. วารสารสมาคมวิศวกรรมเกษตรแห่งประเทศไทย, 31(1), 38. สืบค้น จาก https://li01.tci-thaijo.org/index.php/TSAEJ/article/view/264021
ประเภทบทความ
Power and machinery

เอกสารอ้างอิง

- กรมการค้าต่างประเทศ กระทรวงพาณิชย์. 2565. ข่าวกรมการค้าต่างประเทศ 2565. แหล่งข้อมูล: https://www.dft.go.th. เข้าถึงเมื่อ 25 มิถุนายน 2567.

- ประเทือง อุษาบริสทธิ์, เจตพล อาพันมณี. 2556. การศึกษาการบรรเทาการอัดแน่นของดินทรายแป้งในไร่อ้อย. รายงานการประชุมวิชาการแห่งชาติ มหาวิทยาลัยเกษตรศาสตร์ วิทยาเขตกําแพงแสน ครั้งที่ 10 ประจำปี 2556, 1236-1243. ภาควิชาวิศวกรรมเกษตร มหาวิทยาลัยเกษตรศาสตร์ วิทยาเขตกำแพงแสน. 6–7 ธันวาคม 2556, กำแพงแสน, นครปฐม.

- ปิยะพงษ์ ศรีวงษ์ราช, ศุภกิตต์ สายสุนทร, สิทธิพร มณีวรรณ, นิพนธ์ ภูวเกียรติกําจร. 2561. การประเมินการลื่นไถลของล้อรถแทรกเตอร์ขณะต่อพ่วงเครื่องปลูกอ้อยแบบหยอดชิ้นตาอ้อย. รายงานการประชุมวิชาการแห่งชาติ มหาวิทยาลัยเกษตรศาสตร์ วิทยาเขตกําแพงแสน ครั้งที่ 15 ประจำปี 2561, 122-128. ภาควิชา

วิศวกรรมเกษตร มหาวิทยาลัยเกษตรศาสตร์ วิทยาเขตกำแพงแสน. 6–7 ธันวาคม 2561, กำแพงแสน, นครปฐม.

- ปิยะพงษ์ ศรีวงษ์ราช, ศุภกิตต์ สายสุนทร, สิทธิพร มณีวรรณ, นิพนธ์ ภูวเกียรติกําจร. 2563. การพัฒนาเครื่องปลูกอ้อยแบบใหม่สำหรับวัสดุปลูกชนิดชิ้นตาอ้อย. วารสารวิชาการพระจอมเกล้าพระนครเหนือ 30(1), 4-15.

ภาคภูมิ พันธุขันธ์. 2565. การพัฒนาอุปกรณ์วัดค่าความชื้นในดินด้วยวิธีเก็บประจุไฟฟ้า แบบหลายระดับ. วิทยานิพนธ์วิศวกรรมศาสตรมหาบัณฑิต. มหาสารคาม: บัณฑิตวิทยาลัย, มหาวิทยาลัยมหาสารคาม.

- รุ่งเรือง กาลศิริศิลป์, จตุรงค์ ลังกาพินธุ์, มานพ ตันตระบัณตย์.2553. การพัฒนาเครื่องปลูกมันสำปะหลัง. รายงานการวิจัยฉบับสมบูรณ์, ปทุมธานี: ภาควิชาวิศวกรรมเกษตร,คณะวิศวกรรมศาสตร์, มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรี.

- ศิริเจษฎ์ กองแก้ว, สิงห์รัญ ชารี, ประไพพรรณ สิทธิกูล, บัณฑิต ทองสร้อย, กฤษณ์ ผลโพธิ์. 2564. การพัฒนาและประเมินประสิทธิภาพของเครื่องกำจัดวัชพืชในแปลงข้าวโพดหวาน. วารสารสมาคมวิศวกรรมเกษตรแห่งประเทศไทย 27(2), 12–18.

สำนักงานเศรษฐกิจการเกษตร. 2565. ข้อมูลเศรษฐกิจการเกษตร. แหล่งข้อมูล: https://www.oae.go.th 2565. เข้าถึงเมื่อ 25 มิถุนายน 2567.

- Burns, A., Gleadow R., Cliff, J., Zacarias, A., Cavagnaro, T. 2010. Cassava: The Drought, War and Famine Crop in a Changing World. Sustainability 2, 3572-3607.

- Chang, C.L., Xie, B.X., Chung, S.C. 2021. Mechanical Control with a Deep Learning Method for Precise Weeding on a Farm. Agriculture 11, 1049.

- El-Sharkawy, M.A. 2003. Cassava biology and physiology. Plant Molecular Biology 53, 621-641.

Gbabo, A., Ogbobeogu, I.D., Gana, I.M. 2019. Design, Fabrication, and Testing of a Horizontal Weeding Machine. International Journal of Emerging Engineering Research and Technology 7(11), 12-18.

- Islami, T., Wisnubroto, E.I., Utomo, W.H. 2017. Effect of chemical and mechanical weed control on cassava yield, soil quality and erosion under cassava cropping system. Journal of Advanced Agricultural Technologies 4(1), 57-61.

- Phaphenit, K., Poonpaiboonpipat, T. 2023. The critical period of weed control for cassava planted during the rainy season of Thailand. International Journal of Agricultural Technology 19(3), 1179-1190.

- Rask, A. M., Kristoffersen, P. 2007. A review of non-chemical weed control on hard surfaces. Weed Research 47, 370–380.

- Rasheed, M.W., Tang, J., Sarwar, A., Shah, S.; Saddique, N., Khan, M.U., Imran Khan, M., Nawaz, S., Shamshiri, R.R., Aziz, M., Sultan, M. 2022. Soil moisture measuring techniques and factors affecting the moisture dynamics: A comprehensive review. Sustainability 14, 11538.

- Schwartz-Lazaro, L. M., Copes, J. T. 2019. A review of the soil seed bank from a weed scientists’ perspective. Agronomy 9(7), 1-13.

- Selvan, M.M., Kannamalai, S.J., Ravindran, C.S., Sheriff, J.T. 2015. Development of power weeder for mound-cassava in hilly terrain. Indian Journal of Agricultural Sciences 85(9), 1206–1209.

- Smith, D.W., Sims, B.G., O'Neill, D.H. 1994. Testing and evaluation of agricultural machinery and equipment. Rome, Italy: Food and Agriculture Organization of the United Nations.

- Tillett, N.D., Hague, T., Grundy, A.C., Dedousis, A.P. 2008. Mechanical within row weed control for transplanted crops using computer vision. Biosyst. Eng 99, 171–178.

- Thangdee, D., Wongpichet, S. 2012. Development of Cassava Digger and Conveyor Units. American Journal of Experimental Agriculture 2(3), 458-469.